87+ How To Use Wallpaper Trimming Edge

Then pull the paper away from the wall and trim it along the marked line with the scissors.

How to use wallpaper trimming edge. Next double cut the excess trim on the wall by lining up the pattern and overlapping one strip of wallpaper over the other and cutting through both layers to form a perfectly joined butt seam on the wall. Only attempt this if you can cut a straight line. Use the razor knife to slowly cut the paper with the blade running across the edge of the drywall knife.

Change blades often to ensure that you re using only the sharpest blade or you may tear the paper. Next apply wallpaper to wall with 5 design overlap intact. Juju papers wallpapers are provided untrimmed.

Slide the drywall knife along the paper and continue to trim. Trim the wallpaper allowance at the ceiling and baseboard by using a breakaway razor knife guided by a metal straightedge such as a taping knife or painter s trim guide. Make a diagonal relief cut starting precisely at the 90 degree corner of the trim and extending out to the edge of the paper.

Step 1 measure the distance between the edge of the last sheet of wallpaper and the corner. This means that when you unroll the wallpaper you will see that there is a blank area on the left and right sides of the wallpaper. The smooth the paper over the window and door and roll the seam.

Click here to get free fast bids from local wallpaper hangers in case you re getting cold feet. Place the drywall knife tightly up into the corner at a 45 degree angle. This is called the selvage edge and it is approximately 1 5 on each side.

First remove the 5 white edge protector border. Pushpins will keep long strips of border or paper secure. Measure in several places including the top and bottom edges keeping in mind that most corners aren t perfectly square.