39 How To Use Wallpaper Hanging Brush

Hold them both on the wall and adjust the paper to match the pattern on the wall.

How to use wallpaper hanging brush. Apply secure fabric to the wall. Using a sharp blade cut an x into the paper and fold back the flaps. Following the manufacturer s instructions mix the wallpaper adhesive and apply to the wallpaper with a pasting brush working out from the middle to the edges.

Let one end of the paper flop over the edge of the table. If you would rather the paper hang over and trim then you can be more liberal with the way you are lining it up. Cut along the outside of the junction box.

Cut from the part of the pattern that matches the paper on the wall around the switch. Cut a piece of wallpaper larger than the plate. Working from the corner use the paint brush to apply the wallpaper paste to the wall where you re going to hang your first drop.

Apply paste to the plate then lay it face down on the paper. Lay a strip of wallpaper already cut to size pattern side down on a long flat dry table the table won t stay dry for long. Paste the wall and apply the paper as usual and then feel for the area where you have an outlet or light switch.

Apply a thin coat of wallpaper paste start in one corner at the top. Applying the wallpaper to the accent wall grab the top end of the wallpaper and line it up to the top of your wall. A brush is ideal to apply the paste in the corners and along the edges.

The outlet and switch covers will completely hide those freshly cut edges. Make sure to get even coverage with the roller. Use a paste brush or a paint roller to apply the paste to the half of the paper that remains flat on the table being sure to cover every inch.